Fence Repair
It doesn’t matter if you are replacing your Fence Installation one for the first time. It is crucial to be aware of the steps involved. A fence is an excellent option to increase privacy and curb appeal, as well as security to your home.
The fence will also protect you and your property from the weather’s unpredictable elements protecting you from storms, ice and snow. By using a high-quality material such as vinyl or wood, can make sure that your fence will last for decades to come.
Step 1: Dig the Post Holes
Before you start building your fence, you’ll need to dig all the posts. This can be accomplished by yourself or by an expert contractor. Make sure the holes are deep enough so that they can support the weight of the fence. Make use of a post hole digger or two-person auger to do this.
A post should be placed every 6-8 feet along the fence line. This will ensure that there won’t have any gaps in your fence, and also that the distance between each post is even.
Then, take a measurement of your rails and cut them in order to fit between the posts. These will be the boards you connect the main fence board to.
After the rails are prepared, attach them using screws. If you’re installing a fence made of wood, use 2 to 3 inch galvanized wood screws to attach them to the posts. If you’re building a metal fence, use copper-plated nails.
Check out the Utility Lines
Check with 811 that there aren’t any underground utilities in the proposed fencing area before you start digging. This will prevent your shovel from causing damage to the electric or telephone line.
Step 2: Seat the Posts
After you have placed all the fence posts, it is time to place them in their proper places. To accomplish this you need to dig a hole that is twice the diameter of each post and about one-third of the height of each post. You can use the post hole digger or two-person digger for this job Be sure to keep an eye out for utility lines and pipes as you work.
To strengthen the posts after they have been seated it is possible to tamp down the soil that surrounds each post. This will ensure they are more stable and prevent the fence from sagging in heavy rain and strong winds.
Step 3. Pour concrete into the hole.
After you’ve put all of the posts into their holes, it’s time to fill them with concrete. You’ll need to do this for the entire length of your fence, which includes both ends as well as the middle. Then, you can secure them with stakes and boards.
Concrete takes approximately 24 hours to cure after it’s been poured. The process of building wooden fences will take longer than a metal or vinyl one.
Comments are closed.